Mighty Mac 3000

• High technology, Automatic vacuum sensing
• 1.5 HP TEFC Motor directly coupled to blower.
• Dirty filters are automatically cleaned
• Dust is automatically collected in large dust drawer
• "Micron" cartridge dust filters easily replaced
• Super duty vacuum blower/TEFC motor and no V-belts
• Blower turns at low speed for long bearing life
• High abrasion wear points
• Large gauge on control panel
• Designed for continous duty, high demand flux recovery.
• MM-1500/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)

Typical System Configurations
with Part Numbers

Optional Accessories

Download Spec Sheet (PDF)

• High technology, Automatic vacuum sensing
• 3 HP TEFC Motor directly coupled to blower.
• Dirty filters are automatically cleaned
• Dust is automatically collected
• "Micron" cartridge dust filters
• Super duty vacuum blower/TEFC motor and no V-belts
• Blower turns at low speed for long bearing life
• Oil free operation
• High abrasion wear points
• Designed for continous duty, high demand flux recovery.
• MM-3000/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)

  Typical System Configurations
  with Part Numbers

  Optional Accessories

Download Spec Sheet (PDF)

• High technology, Automatic vacuum sensing
• 5 HP TEFC Motor directly coupled to blower.
• Dirty filters are automatically cleaned
• Dust is automatically collected
• "Micron" cartridge dust filters
• Super duty vacuum blower/TEFC motor and no V-belts
• Blower turns at low speed for long bearing life
• Oil free operation
• High abrasion wear points
• Designed for continous duty, high demand flux recovery.
• MM-5000/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)

  Typical System Configurations
  with Part Numbers

  Optional Accessories

  Download Spec Sheet (PDF)

• Four special high capacity filters
• 5 HP TEFC Motor directly coupled to blower.
• Dust is automatically transferred
• Dust is automatically cleaned
• Remote on/off switch
• Super duty vacuum blower and TEFC motor
• No V-belts
• Large gauge on control panel
• Quiet, clean, dust free operation
  

Typical System Configurations
with Part Numbers

Optional Accessories

Download Spec Sheet (PDF)

• 1-1/2 HP
• "Portable heavy duty flux recovery system"
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• "Micron" cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no "V" belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 200 lb. (91 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.

  Typical System Configurations
  with Part Numbers

  Optional Accessories

Download Spec Sheets (PDF)

• 3 HP
• "Portable heavy duty flux recovery system"
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• "Micron" cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no "V" belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 200 lb. (91 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.

  Typical System Configurations
  with Part Numbers

  Optional Accessories

Download Spec Sheets (PDF)

• 5 HP
• "Portable heavy duty flux recovery system"
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• "Micron" cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no "V" belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 200 lb. (91 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.

  Typical System Configurations
  with Part Numbers

  Optional Accessories

Download Spec Sheets (PDF)

• 1-1/2 HP
• "Stationary heavy duty flux recovery system"
• Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (200lbs capacity) flux hopper/separator or the MS-1 separator at no extra cost.
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• "Micron" cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no "V" belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 200 lb. (91 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.
• Lighter and more compact than other competitive units.

  Typical System Configurations
  with Part Numbers

  Optional Accessories

Download Spec Sheets (PDF)

• 3 HP
• "Stationary heavy duty flux recovery system"
• Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (200lbs capacity) flux hopper/separator or the MS-1 separator at no extra cost.
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• "Micron" cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no "V" belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 200 lb. (91 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.
• Lighter and more compact than other competitive units.

  Typical System Configurations
  with Part Numbers

  Optional Accessories

Download Spec Sheets (PDF)

• 5 HP
• "Stationary heavy duty flux recovery system"
• Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (200lbs capacity) flux hopper/separator or the MS-1 separator at no extra cost.
• Vacuum sensing gauge indicates when filter needs to be cleaned.
• Dirty filter is semi-automatically cleaned by high energy shock wave of air.
• Dust is automatically collected in dust drawer for easy removal.
• "Micron" cartridge dust filter is long lasting and easily replaced.
• Super duty vacuum blower/TEFC motor assembly has no "V" belts and are designed to run with low maintenance.
• Blower turns at low speed for long bearing life.
• Oil free operation unlike many competitive recovery vacuums.
• Higher vacuum and more efficient than other competitive products.
• High abrasion wear points in flux separator are inexpensive and easily replaced.
• Designed for continuous duty, high demand flux recovery applications.
• Large 200 lb. (91 Kg) hopper/separator for flux storage.
• Slide valve for easy transfer of recovered flux to another container.
• Flux level windows in hopper enable easy estimate of recovered flux.
• Lighter and more compact than other competitive units.

  Typical System Configurations
  with Part Numbers

  Optional Accessories

Download Spec Sheets (PDF)