Flux recovery separator mounted to system hopper. MM-1500 vacuum with MS-1 or MS-1-E/P separator. (Typical component configuration.)

Flux recovery separator mounted to system hopper MM-1500/P vacuum with MS-1 or MS-1-E/P separator. (Typical component configuration.)

Gravity feed system for continuous flux feed. MM-1500, MM-3000, MM-5000 vacuum with FH-100 or heated HFH-100 hopper/separator. (Typical component configuration.)

Flux recovery system for continuous flux feed. (Note: not dependent upon "Head Height" like standard FH-100.) MM-1500, MM-3000, MM-5000 vacuum with FH-100-E/P or heated HFH-100-E/P hopper/separator. (Typical component configuration.)

Gravity feed system for continuous flux feed. MM-1500/P, MM-3000/P, MM-5000/P vacuum with FH-100 or heated HFH-100 hopper/separator. (Typical component configuration.)

Dual welding station flux recovery system. Mighty-Mac vacuum with 2@ MS-1 or MS-1-E/P separators. (Typical configuration)

Dual welding station flux recovery system. Mighty-Mac/P vacuum with 2@ MS-1 or MS-1-E/P separators. (Typical configuration)

Dual welding station flux recovery system. Mighty-Mac vacuum with 2@ FH-100 or HFH-100 separators. (Typical configuration)

Dual welding station flux recovery system. Mighty-Mac/P vacuum with 2@ FH-100 or HFH-100 separators. (Typical configuration)

Small tanks or roll build-up. Dual welding station flux recovery system. Mighty-Mac vacuum with 2@ MS-1 or MS-1-E/P separators with flux troughs. (Typical configuration)

Small tanks or roll build-up. Dual welding station flux recovery system. Mighty-Mac vacuum with 2@ FH-100 or HFH-100 separators. (Typical configuration)

Dual flux pick-up (At weld and below weld in trough). Typical component configuration.

Flux pick-up with hopper loading trough. Gravity feed system for continuous flux feed. MM-1500, MM-3000, MM-5000 vacuum with FH-100 or heated HFH-100 hopper/separator. (Typical component configuration.)

Pressure feed flux to a gravity feed system for continuous flux feed and easy loading of hopper. MM-1500, MM-3000 or MM-5000 vacuum with FH-100 or heated HFH-100 hopper/separator, PT-x00 feed tank and FF-3 feed pipe. (Typical component configuration.)

Pressure feed and recover system for continuous flux feed. MM-1500, MM-3000, MM-5000 vacuum with PFR-3000 or LPFR-3000 and PFR-LD3 lid. (Typical component configuration.)

Pressure feed and recover system for continuous flux feed. MM-5000-MILL vacuum with PFR-3000 or LPFR-3000 and PFR-LD3 lid. (Typical component configuration.) For pipe mill internal weld or other very heavy duty flux recovery application where weld size is important.

Pipe Mill or other heavy welding application. System shown is tandem welding heads. Recovery system is the MM-5000-MILL vacuum with FH-100 or heated HFH-100 hopper/separator. (Typical component configuration.)

Heated automatic mixing flux hopper/separator MM-1500 vacuum with HAMX-50 (Typical component configuration.)

GHAMX-150 gravity feed heated automatic mixing system for continuous flux feed. MM-1500, MM-3000, MM-5000 vacuum with GHAMX-150 separator (Typical component configuration.)