Click On
Earth to See
Resources
Saved!!
Click On
Earth to See
Resources
Saved!!
Click on Earth for Money Saver Calculator
Weld Engineering Header
"MANUFACTURERS OF THE MOST COMPLETE LINE OF SUBMERGED ARC FLUX HANDLING EQUIPMENT IN THE WORLD"
ENGINEERING CO., INC.
Excellence Since 1979
Flux Recovery, Earth Resource Recovery, Save Flux, Save the Earth, Save Money
34 FRUIT ST.
SHREWSBURY, MA 01545 U.S.A.
PHONE: (508) 842-2224
FAX: (508) 842-3893
Checkmark
MV-5, Click for larger image.

MV-5 VACCUM

  • 3/4 HP
  • Small, yet heavy duty electric flux vacuum.
  • Very quiet. No high pitch sound.
  • Works with standard 115 VAC power. Plugs into most welders (6.7 to 8 amps).
  • Very low maintenance. Easy to clean out dust.
  • Comes with FHMV5-100 flux hopper, 100 LB. capacity.
  • Flashing light tells you when to clean.
  • Shake bag, dust falls into pan, pull out dust pan and empty.
  • Perfect for girth welders.
MM-1500X, Click for larger image.

Mighty Mac 1500X
Mighty Mac 1500X/P

  • 2 HP
  • High technology, vacuum sensing logic automatically cleans dust-clogged filters.
  • Super heavy duty TEFC Motor directly coupled to blower.
  • Dirty filters are automatically cleaned
  • Dust is automatically collected in large dust drawer
  • “Micron” cartridge dust filters easily replaced
  • Super duty vacuum blower/TEFC motor and no V-belts
  • Blower turns at low speed for long bearing life
  • High abrasion wear points
  • Large gauge on control panel
  • Designed for continous duty, high demand flux recovery.
  • MM-1500X/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)
MM-3000X, Click for larger image.

Mighty Mac 3000X
Mighty Mac 3000X/P

  • 4 HP
  • High technology, vacuum sensing logic automatically cleans dust-clogged filters.
  • Super heavy duty TEFC Motor directly coupled to blower.
  • Dirty filters are automatically cleaned
  • Dust is automatically collected
  • “Micron” cartridge dust filters
  • Super duty vacuum blower/TEFC motor and no V-belts
  • Blower turns at low speed for long bearing life
  • Oil free operation
  • High abrasion wear points
  • Designed for continous duty, high demand flux recovery.
  • MM-3000X/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)
MM-5000X, Click for larger image.

Mighty Mac 5000X
Mighty Mac 5000X/P

  • 5.5 HP
  • High technology, vacuum sensing logic automatically cleans dust-clogged filters.
  • Super heavy duty TEFC Motor directly coupled to blower.
  • Dirty filters are automatically cleaned
  • Dust is automatically collected
  • “Micron” cartridge dust filters
  • Super duty vacuum blower/TEFC motor and no V-belts
  • Blower turns at low speed for long bearing life
  • Oil free operation
  • High abrasion wear points
  • Designed for continous duty, high demand flux recovery.
  • MM-5000X/P dust filter chamber has a hopper bottom instead of a dust drawer. This enables continuous dumping of dust to a much larger dust container below the Mighty-Mac (ie. FD-55 dust drum)
MM-5000X-MILL, Click for larger image.

Mighty Mac 5000X Mill

  • 5.5 HP
  • Four special high capacity filters
  • Super heavy duty TEFC Motor directly coupled to blower.
  • Dust is automatically transferred
  • Dust is automatically cleaned
  • Remote on/off switch
  • Super duty vacuum blower and TEFC motor
  • No V-belts
  • Large gauge on control panel
  • Quiet, clean, dust free operation
SPS-1500, Click for larger image.

SPS-1500

  • 2 HP
  • “Stationary heavy duty flux recovery system”
  • Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Slide valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
  • Lighter and more compact than other competitive units.
SPS-3000, Click for larger image.

SPS-3000

  • 4 HP
  • “Stationary heavy duty flux recovery system”
  • Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Slide valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
  • Lighter and more compact than other competitive units.
SPS-5000, Click for larger image.

SPS-5000

  • 5.5 HP
  • “Stationary heavy duty flux recovery system”
  • Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Slide valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
  • Lighter and more compact than other competitive units.
SPS-7500, Click for larger image.

SPS-7500

  • 7.5 HP
  • “Stationary heavy duty flux recovery system”
  • Comes complete with semi-automatic dust collection unit and your choice of either the FH-100 (150 lb. capacity) flux hopper/separator or the MS-1 separator at no extra cost.
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Slide valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
  • Lighter and more compact than other competitive units.
PS-1500, Click for larger image.

PS-1500

  • 2 HP
  • “Portable heavy duty flux recovery system”
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Slide valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
PS-3000, Click for larger image.

PS-3000

  • 4 HP
  • “Portable heavy duty flux recovery system”
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Slide valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
PS-5000, Click for larger image.

PS-5000

  • 5.5 HP
  • “Portable heavy duty flux recovery system”
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Slide valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
PS-7500, Click for larger image.

PS-7500

  • 7.5 HP
  • “Portable heavy duty flux recovery system”
  • Vacuum sensing gauge indicates when filter needs to be cleaned.
  • Dirty filter is semi-automatically cleaned by high energy shock wave of air.
  • Dust is automatically collected in dust drawer for easy removal.
  • “Micron” cartridge dust filter is long lasting and easily replaced.
  • Super duty vacuum blower/TEFC motor assembly has no “V” belts and are designed to run with low maintenance.
  • Blower turns at low speed for long bearing life.
  • Oil free operation unlike many competitive recovery vacuums.
  • Higher vacuum and more efficient than other competitive products.
  • High abrasion wear points in flux separator are inexpensive and easily replaced.
  • Designed for continuous duty, high demand flux recovery applications.
  • Large 150 lb. (68 Kg) hopper/separator for flux storage.
  • Ball valve for easy transfer of recovered flux to another container.
  • Flux level windows in hopper enable easy estimate of recovered flux.
Click Image to Close.