Page 17 - Weld Engineering Product Selection Pages
P. 17
34 Fruit St.
“MANUFACTURERS OF THE MOST COMPLETE LINE Shrewsbury, MA 01545 (U.S.A.)
OF FLUX HANDLING EQUIPMENT IN THE WORLD”
Telephone: (508) 842-2224
Fax: (508) 842-3893
Website:
www.weldengineering.com
Email:
[email protected]
March 1, 2018
7. SUPER-FH-100-A/P 150 POUND CAPACITY “AIR POWERED” FLUX VAC
WITH HOPPER/SEPARATOR.
Powerful air operated vacuum introduces no oil or water
to the flux and produces no damage to the recovered flux
particles since recovered flux is not in the compressed air
stream. The SUPER-FH-100-A/P is a 150 pound capacity
gravity feed recovery unit with a slag tray, and two large
sight window level indicators. Comes complete with 7 feet
of 1 1/2" dispensing hose and 10 feet of 1 1/2" recovery
hose, and NZ-1 flux pick-up nozzle.
(See page 12 for recommended system order list.)
Input power: Shop air (14 cfm @ 70-100 psi,
using minimum 1/4" I.D. air hose).
8. SUPER-HFH-100-A/P HEATED 150 POUND CAPACITY “AIR POWERED”
FLUX VAC WITH HOPPER/SEPARATOR.
The SUPER-HFH-100-A/P is the same as the SUPER-
FH-100-A/P, except heated. It has a Continuous digital
thermostat control (ambient to 250°F {121°C}) and large
digital display for easy reading.. Please specify voltage
(115V/1PH/50-60HZ or 220V/1PH/50-60HZ).
(See page 12 for recommended system order list.)
Input power: Shop air (14 cfm @ 70-100 psi,
using minimum 1/4" I.D. air hose).
page 10 2018 PRODUCT SELECTION WITH PRICES.PMD
