Click On
Earth to See
Resources
Saved!!
Click On
Earth to See
Resources
Saved!!
Click on Earth for Money Saver Calculator
Weld Engineering Header
"MANUFACTURERS OF THE MOST COMPLETE LINE OF SUBMERGED ARC FLUX HANDLING EQUIPMENT IN THE WORLD"
ENGINEERING CO., INC.
Excellence Since 1979
Flux Recovery, Earth Resource Recovery, Save Flux, Save the Earth, Save Money
34 FRUIT ST.
SHREWSBURY, MA 01545 U.S.A.
PHONE: (508) 842-2224
FAX: (508) 842-3893
Checkmark
HTS-700-850, Click for larger image.

HTS-700-850° Flux Super Oven

  • Typically holds over 700 lb. (226 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Powerful 4000 watt heating elements (Uses “low watt density” elements to prevent localized over heating of flux)
  • Designed to reduce H2O content in flux to below 0.05% by weight.
  • Designed to eliminate “hydrogen assisted cracking” in high yeild steels.
  • Total and uniform heating of flux. (Heating elements extend through the flux, insuring total heat transfer. Most flux particles are no more than 2″ from a heating element.)
  • High temperature range from 200°F to 850°F (93°C to 454°C).
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Lifting bales and fork rails make moving easy
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
  • By a simple push of a button, the HTS-700-850 re-bakes flux at an adjustable temperature of 200°F (93°C) to 850°F (454°C) for an adjustable time (3 min. to 5hrs. factory set at 2hrs.).
  • Automatically resets to an adjustable storage temperature of 175°F (79°C) to 550°F (288°C) after bake cycle.
  • Holds at the storage temperature until the re-bake button is pressed. Pressing re-bake button starts re-bake cycle over again.
  • Large control knobs and push buttons make operation very easy.
HTP-100-850, Click for larger image.

HTP-100-850° Flux Super Oven

  • Typically holds over 100 lb. (45.4 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Designed to reduce H2O content in flux to below 0.05% by weight.
  • Designed to eliminate “hydrogen assisted cracking” in high yeild steels.
  • Powerful 1000 watt heating element
  • Total uniform heating of flux
  • Temperature range from 200°F to 850°F (93°C to 454°C)
  • Accurate temperature control
  • Large thermometer for easy reading (both °F and °C)
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Portable and easy to use
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
  • By a simple push of a button, the HPT-100-850 re-bakes flux at an adjustable temperature of 200°F (93°C) to 850°F (454°C) for an adjustable time (3 min. to 5hrs. factory set at 2hrs.).
  • Automatically resets to an adjustable storage temperature of 175°F (79°C) to 550°F (288°C) after bake cycle.
  • Holds at the storage temperature until the re-bake button is pressed. Pressing re-bake button starts re-bake cycle over again.
  • Large control knobs and push buttons make operation very easy.
FO-700HT-AB, Click for larger image.

FO-700HT-AB Flux Oven

  • Typically holds over 700 lb. (226 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Powerful 4000 watt heating elements (Uses “low watt density” elements to prevent localized over heating of flux)
  • Total and uniform heating of flux.(Heating elements extend through the flux, insuring total heat transfer. Most flux particles are no more than 2″ from a heating element.)
  • Temperature range from 300°F to 700°F (148°C to 371°C). See our FO-700 or FO-700-AB for lower temperatures to 550°F (288°C).
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Lifting bales and fork rails make moving easy
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
  • By a simple push of a button, the FO-700HT-AB re-bakes flux at an adjustable temperature of 300°F (148°C) to 700°F (371°C) for an adjustable time (3 min. to 5hrs. factory set at 2hrs.).
  • Automatically resets to an adjustable storage temperature of 300°F (148°C) to 700°F (371°C) after bake cycle.
  • Holds at the storage temperature until the re-bake button is pressed. Pressing re-bake button starts re-bake cycle over again.
  • Large control knobs and push buttons make operation very easy.
FO-700HT, Click for larger image.

FO-700HT Flux Oven

  • Typically holds over 700 lb. (226 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Powerful 4000 watt heating elements (Uses “low watt density” elements to prevent localized over heating of flux)
  • Total and uniform heating of flux.(Heating elements extend through the flux, insuring total heat transfer. Most flux particles are no more than 2″ from a heating element.)
  • Temperature range from 300°F to 700°F (148°C to 371°C). See our FO-700 or FO-700-AB for lower temperatures to 550°F (288°C).
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Lifting bales and fork rails make moving easy
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
FO-700-AB, Click for larger image.

FO-700-AB Flux Oven

  • Typically holds over 700 lb. (226 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Powerful 4000 watt heating elements (Uses “low watt density” elements to prevent localized over heating of flux)
  • Total and uniform heating of flux.(Heating elements extend through the flux, insuring total heat transfer. Most flux particles are no more than 2″ from a heating element.)
  • Temperature range from 175°F to 550°F (79°C to 288°C). See our FO-700HT or FO-700HT-AB for higher temperatures to 700°F (371°C).
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Lifting bales and fork rails make moving easy
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
  • By a simple push of a button, the FO-700-AB re-bakes flux at an adjustable temperature of 175°F (79°C) to 550°F (288°C) for an adjustable time (3 min. to 5hrs. factory set at 2hrs.).
  • Automatically resets to an adjustable storage temperature of 175°F (79°C) to 550°F (288°C) after bake cycle.
  • Holds at the storage temperature until the re-bake button is pressed. Pressing re-bake button starts re-bake cycle over again.
  • Large control knobs and push buttons make operation very easy.
FO-700, Click for larger image.

FO-700 Flux Oven

  • Typically holds over 700 lb. (226 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Powerful 4000 watt heating elements (Uses “low watt density” elements to prevent localized over heating of flux)
  • Total and uniform heating of flux.(Heating elements extend through the flux, insuring total heat transfer. Most flux particles are no more than 2″ from a heating element.)
  • Temperature range from 175°F to 550°F (79°C to 288°C). See our FO-700HT or FO-700HT-AB for higher temperatures to 700°F (371°C).
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Lifting bales and fork rails make moving easy
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
PFO-100-AB, Click for larger image.

PFO-100-AB Flux Oven

  • Typically holds over 100 lb. (45.4 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Powerful 1000 watt heating element
  • Total uniform heating of flux
  • Temperature range from 175 °F to 550 °F (79°C to 288°C)
  • Accurate temperature control
  • Large thermometer for easy reading (both °F and °C)
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Portable and easy to use
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
  • By a simple push of a button, the PFO-100-AB re-bakes flux at an adjustable temperature of 175°F (79°C) to 550°F (288°C) for an adjustable time (3 min. to 5hrs. factory set at 2hrs.).
  • Automatically resets to an adjustable storage temperature of 175°F (79°C) to 550°F (288°C) after bake cycle.
  • Holds at the storage temperature until the re-bake button is pressed. Pressing re-bake button starts re-bake cycle over again.
  • Large control knobs and push buttons make operation very easy.
PFO-100, Click for larger image.

PFO-100 Flux Oven

  • Typically holds over 100 lb. (45.4 Kg) of flux. (Weight will vary depending on type and density of flux.)
  • Powerful 1000 watt heating element
  • Total uniform heating of flux
  • Temperature range from 175°F to 550°F (79°C to 288°C)
  • Accurate temperature control
  • Large thermometer for easy reading (both °F and °C)
  • High temperature fiber glass insulation for maximum efficiency
  • Removable slag screen
  • Portable and easy to use
  • Flux valve on front of oven discharges hot flux quickly and easily into an appropriate container
Click Image to Close.